Chains to Microinches Converter Chains ch
Microinches
-
µin Reset Copy
Calculation: Chains ➜ Microinches Calculation will be done after you enter a valid input.
Chains unit in Length A chain is a unit of length traditionally used in land surveying, equal to 66 feet or approximately 20.12 meters. The chain was originally based on the length of a surveyor's chain and is still used in some contexts for measuring land parcels, particularly in the United States and the United Kingdom. This unit is also commonly referenced in historical land records.
Microinches unit in Length A microinch is a unit of length equal to one-millionth of an inch or approximately 0.0254 micrometers. This unit is commonly used in precision engineering and manufacturing, especially when specifying surface finishes and tolerances for materials and components.
Frequently Asked Questions (FAQs) about "Chains ➜ Microinches" Conversion 1. What is the conversion formula from Chains to Microinches? The formula to convert Chains to Microinches in Length is:
Chains / 1.2626262631650504e-9 2. How do I convert from Chains to Microinches given a value in Chains units? To convert Length from Chains to Microinches, you can use the following formula:
Chains / 1.2626262631650504e-9 For example, if you have a value in Chains, you substitute that value in place of Chains in the above formula, and solve the mathematical expression to get the equivalent value in Microinches.
{
"conversion": "chains-to-microinches",
"x_slug": "chains",
"y_slug": "microinches",
"x": "ch",
"y": "µin",
"x_desc": "Chains",
"y_desc": "Microinches",
"category": "Length",
"symbol": "m",
"formula": "x / 1.2626262631650504e-9",
"precision": 16,
"units": [
[
"meters",
"Meters",
"m"
],
[
"kilometers",
"Kilometers",
"km"
],
[
"decimeters",
"Decimeters",
"dm"
],
[
"centimeters",
"Centimeters",
"cm"
],
[
"millimeters",
"Millimeters",
"mm"
],
[
"micrometers",
"Micrometers",
"µm"
],
[
"nanometers",
"Nanometers",
"nm"
],
[
"miles",
"Miles",
"mi"
],
[
"yards",
"Yards",
"yd"
],
[
"feet",
"Feet",
"ft"
],
[
"inches",
"Inches",
"in"
],
[
"lightyears",
"Lightyears",
"ly"
],
[
"exameters",
"Exameters",
"Em"
],
[
"petameters",
"Petameters",
"Pm"
],
[
"terameters",
"Terameters",
"Tm"
],
[
"gigameters",
"Gigameters",
"Gm"
],
[
"megameters",
"Megameters",
"Mm"
],
[
"hectometers",
"Hectameters",
"hm"
],
[
"dekameters",
"Dekameters",
"dam"
],
[
"microns",
"Microns",
"µ"
],
[
"picometers",
"Picometers",
"pm"
],
[
"femtometers",
"Femtometers",
"fm"
],
[
"attometers",
"Attometers",
"am"
],
[
"megaparsecs",
"Megaparsecs",
"Mpc"
],
[
"kiloparsecs",
"Kiloparsecs",
"kpc"
],
[
"parsecs",
"Parsecs",
"pc"
],
[
"astronomical_unit",
"Astronomical Units",
"AU"
],
[
"leagues",
"Leagues",
"lea"
],
[
"nautical_leagues_uk",
"Nautical Leagues (UK)",
"nautical league"
],
[
"nautical_leagues",
"Nautical Leagues (International)",
"nautical league"
],
[
"leagues_statute",
"Leagues (statute)",
"st.league"
],
[
"nautical_miles_uk",
"Nautical Miles (UK)",
"NM (UK)"
],
[
"nautical_miles",
"Nautical miles (International)",
"nmi"
],
[
"miles_statute",
"Miles (statute)",
"mi (US)"
],
[
"miles_us_survey",
"Miles (US survey)",
"mi"
],
[
"miles_roman",
"Miles (Roman)",
"mi (roman)"
],
[
"kiloyards",
"Kiloyards",
"kyd"
],
[
"furlongs",
"Furlongs",
"fur"
],
[
"furlongs_us_survey",
"Furlongs (US survey)",
"fur"
],
[
"chains",
"Chains",
"ch"
],
[
"chain_us_survey",
"Chains (US survey)",
"ch"
],
[
"ropes",
"Ropes",
"rope"
],
[
"rods",
"Rod",
"rd"
],
[
"rods_us_survey",
"Rods (US survey)",
"rd"
],
[
"perch",
"Perch",
"perch"
],
[
"poles",
"Poles",
"pole"
],
[
"fathoms",
"Fathoms",
"fath"
],
[
"fathoms_us_survey",
"Fathoms (US survey)",
"fath"
],
[
"ell",
"ell",
"ell"
],
[
"foot_us_survey",
"Feet (US survey)",
"ft"
],
[
"links",
"Links",
"li"
],
[
"links_us_survey",
"link (US survey)",
"li"
],
[
"cubits_uk",
"Cubits (UK)",
"cubit"
],
[
"hands",
"Hands",
"hand"
],
[
"span_cloth",
"Span (cloth)",
"span"
],
[
"fingers_cloth",
"Fingers (cloth)",
"finger"
],
[
"nails",
"Nails (cloth)",
"nail"
],
[
"inches_us_survey",
"Inches (US survey)",
"in"
],
[
"barleycorns",
"Barleycorns",
"barleycorn"
],
[
"mil",
"mil",
"mil"
],
[
"microinches",
"Microinches",
"µin"
],
[
"angstroms",
"Angstroms",
"A"
],
[
"fermi",
"Fermi",
"f"
],
[
"arpents",
"Arpent",
"arpent"
],
[
"picas",
"Pica",
"pica"
],
[
"points",
"Point",
"point"
],
[
"twips",
"Twip",
"twip"
],
[
"aln",
"aln",
"aln"
],
[
"famns",
"Famns",
"famn"
],
[
"calibers",
"Caliber",
"cl"
],
[
"centiinches",
"Centiinch",
"cin"
],
[
"kens",
"Kens",
"ken"
],
[
"russian_archin",
"Russian archin",
"russian archin"
],
[
"roman_actus",
"Roman actus",
"Roman actus"
],
[
"vara_de_tarea",
"Vara De Tarea",
"vara de tarea"
],
[
"vara_conuquera",
"Vara Conuquera",
"vara conuquera"
],
[
"vara_castellana",
"vara Castellana",
"vara castellana"
],
[
"cubits_greek",
"Cubit (Greek)",
"cubit (Greek)"
],
[
"long_reeds",
"Long Reed",
"long reed"
],
[
"reeds",
"Reed",
"reed"
],
[
"long_cubits",
"Long cubits",
"long cubit"
],
[
"handbreadths",
"Handbreadth",
"handbreadth"
],
[
"fingerbreadth",
"Fingerbreadth",
"fingerbreadth"
],
[
"planck_length",
"Planck length",
"Planck length"
],
[
"electron_radius_classical",
"Electron radius (classical) ",
"electron radius"
],
[
"bohr_radius",
"Bohr radius",
"b"
],
[
"earths_equatorial_radius",
"Earth's equatorial radius",
"earth's equatorial radius"
],
[
"earths_polar_radius",
"Earth's polar radius",
"Earth's polar radius"
],
[
"earths_distance_from_sun",
"Earth's distance from sun",
"earth's distance from sun"
],
[
"suns_radius",
"Sun's radius",
"sun's radius"
]
],
"x_long_desc": "A chain is a unit of length traditionally used in land surveying, equal to 66 feet or approximately 20.12 meters. The chain was originally based on the length of a surveyor's chain and is still used in some contexts for measuring land parcels, particularly in the United States and the United Kingdom. This unit is also commonly referenced in historical land records.",
"y_long_desc": "A microinch is a unit of length equal to one-millionth of an inch or approximately 0.0254 micrometers. This unit is commonly used in precision engineering and manufacturing, especially when specifying surface finishes and tolerances for materials and components."
} 