Fingers (cloth) to Feet (US survey) Converter Fingers (cloth) finger
Feet (US survey)
-
ft Reset Copy
Calculation: Fingers (cloth) ➜ Feet (US survey) Calculation will be done after you enter a valid input.
Fingers (cloth) unit in Length A finger (cloth) is a traditional unit of length used in the textile industry, typically equal to 4.5 inches or approximately 11.43 centimeters. It was used to measure smaller lengths of fabric, based on the width of a finger. While largely obsolete today, this unit remains part of historical measurement practices in cloth and fabric industries.
Feet (US survey) unit in Length A U.S. survey foot is a unit of length used in American land surveying, equal to approximately 0.30480061 meters. This unit is slightly longer than the international foot and is used in precise land measurements for legal purposes. The U.S. survey foot is essential for maintaining consistency in property boundaries and land records across the United States.
Frequently Asked Questions (FAQs) about "Fingers (cloth) ➜ Feet (US survey)" Conversion 1. What is the conversion formula from Fingers (cloth) to Feet (US survey)? The formula to convert Fingers (cloth) to Feet (US survey) in Length is:
Fingers (cloth) / 2.6666720000372535 2. How do I convert from Fingers (cloth) to Feet (US survey) given a value in Fingers (cloth) units? To convert Length from Fingers (cloth) to Feet (US survey), you can use the following formula:
Fingers (cloth) / 2.6666720000372535 For example, if you have a value in Fingers (cloth), you substitute that value in place of Fingers (cloth) in the above formula, and solve the mathematical expression to get the equivalent value in Feet (US survey).
{
"conversion": "fingers_cloth-to-foot_us_survey",
"x_slug": "fingers_cloth",
"y_slug": "foot_us_survey",
"x": "finger",
"y": "ft",
"x_desc": "Fingers (cloth)",
"y_desc": "Feet (US survey)",
"category": "Length",
"symbol": "m",
"formula": "x / 2.6666720000372535",
"precision": 16,
"units": [
[
"meters",
"Meters",
"m"
],
[
"kilometers",
"Kilometers",
"km"
],
[
"decimeters",
"Decimeters",
"dm"
],
[
"centimeters",
"Centimeters",
"cm"
],
[
"millimeters",
"Millimeters",
"mm"
],
[
"micrometers",
"Micrometers",
"µm"
],
[
"nanometers",
"Nanometers",
"nm"
],
[
"miles",
"Miles",
"mi"
],
[
"yards",
"Yards",
"yd"
],
[
"feet",
"Feet",
"ft"
],
[
"inches",
"Inches",
"in"
],
[
"lightyears",
"Lightyears",
"ly"
],
[
"exameters",
"Exameters",
"Em"
],
[
"petameters",
"Petameters",
"Pm"
],
[
"terameters",
"Terameters",
"Tm"
],
[
"gigameters",
"Gigameters",
"Gm"
],
[
"megameters",
"Megameters",
"Mm"
],
[
"hectometers",
"Hectameters",
"hm"
],
[
"dekameters",
"Dekameters",
"dam"
],
[
"microns",
"Microns",
"µ"
],
[
"picometers",
"Picometers",
"pm"
],
[
"femtometers",
"Femtometers",
"fm"
],
[
"attometers",
"Attometers",
"am"
],
[
"megaparsecs",
"Megaparsecs",
"Mpc"
],
[
"kiloparsecs",
"Kiloparsecs",
"kpc"
],
[
"parsecs",
"Parsecs",
"pc"
],
[
"astronomical_unit",
"Astronomical Units",
"AU"
],
[
"leagues",
"Leagues",
"lea"
],
[
"nautical_leagues_uk",
"Nautical Leagues (UK)",
"nautical league"
],
[
"nautical_leagues",
"Nautical Leagues (International)",
"nautical league"
],
[
"leagues_statute",
"Leagues (statute)",
"st.league"
],
[
"nautical_miles_uk",
"Nautical Miles (UK)",
"NM (UK)"
],
[
"nautical_miles",
"Nautical miles (International)",
"nmi"
],
[
"miles_statute",
"Miles (statute)",
"mi (US)"
],
[
"miles_us_survey",
"Miles (US survey)",
"mi"
],
[
"miles_roman",
"Miles (Roman)",
"mi (roman)"
],
[
"kiloyards",
"Kiloyards",
"kyd"
],
[
"furlongs",
"Furlongs",
"fur"
],
[
"furlongs_us_survey",
"Furlongs (US survey)",
"fur"
],
[
"chains",
"Chains",
"ch"
],
[
"chain_us_survey",
"Chains (US survey)",
"ch"
],
[
"ropes",
"Ropes",
"rope"
],
[
"rods",
"Rod",
"rd"
],
[
"rods_us_survey",
"Rods (US survey)",
"rd"
],
[
"perch",
"Perch",
"perch"
],
[
"poles",
"Poles",
"pole"
],
[
"fathoms",
"Fathoms",
"fath"
],
[
"fathoms_us_survey",
"Fathoms (US survey)",
"fath"
],
[
"ell",
"ell",
"ell"
],
[
"foot_us_survey",
"Feet (US survey)",
"ft"
],
[
"links",
"Links",
"li"
],
[
"links_us_survey",
"link (US survey)",
"li"
],
[
"cubits_uk",
"Cubits (UK)",
"cubit"
],
[
"hands",
"Hands",
"hand"
],
[
"span_cloth",
"Span (cloth)",
"span"
],
[
"fingers_cloth",
"Fingers (cloth)",
"finger"
],
[
"nails",
"Nails (cloth)",
"nail"
],
[
"inches_us_survey",
"Inches (US survey)",
"in"
],
[
"barleycorns",
"Barleycorns",
"barleycorn"
],
[
"mil",
"mil",
"mil"
],
[
"microinches",
"Microinches",
"µin"
],
[
"angstroms",
"Angstroms",
"A"
],
[
"fermi",
"Fermi",
"f"
],
[
"arpents",
"Arpent",
"arpent"
],
[
"picas",
"Pica",
"pica"
],
[
"points",
"Point",
"point"
],
[
"twips",
"Twip",
"twip"
],
[
"aln",
"aln",
"aln"
],
[
"famns",
"Famns",
"famn"
],
[
"calibers",
"Caliber",
"cl"
],
[
"centiinches",
"Centiinch",
"cin"
],
[
"kens",
"Kens",
"ken"
],
[
"russian_archin",
"Russian archin",
"russian archin"
],
[
"roman_actus",
"Roman actus",
"Roman actus"
],
[
"vara_de_tarea",
"Vara De Tarea",
"vara de tarea"
],
[
"vara_conuquera",
"Vara Conuquera",
"vara conuquera"
],
[
"vara_castellana",
"vara Castellana",
"vara castellana"
],
[
"cubits_greek",
"Cubit (Greek)",
"cubit (Greek)"
],
[
"long_reeds",
"Long Reed",
"long reed"
],
[
"reeds",
"Reed",
"reed"
],
[
"long_cubits",
"Long cubits",
"long cubit"
],
[
"handbreadths",
"Handbreadth",
"handbreadth"
],
[
"fingerbreadth",
"Fingerbreadth",
"fingerbreadth"
],
[
"planck_length",
"Planck length",
"Planck length"
],
[
"electron_radius_classical",
"Electron radius (classical) ",
"electron radius"
],
[
"bohr_radius",
"Bohr radius",
"b"
],
[
"earths_equatorial_radius",
"Earth's equatorial radius",
"earth's equatorial radius"
],
[
"earths_polar_radius",
"Earth's polar radius",
"Earth's polar radius"
],
[
"earths_distance_from_sun",
"Earth's distance from sun",
"earth's distance from sun"
],
[
"suns_radius",
"Sun's radius",
"sun's radius"
]
],
"y_long_desc": "A U.S. survey foot is a unit of length used in American land surveying, equal to approximately 0.30480061 meters. This unit is slightly longer than the international foot and is used in precise land measurements for legal purposes. The U.S. survey foot is essential for maintaining consistency in property boundaries and land records across the United States.",
"x_long_desc": "A finger (cloth) is a traditional unit of length used in the textile industry, typically equal to 4.5 inches or approximately 11.43 centimeters. It was used to measure smaller lengths of fabric, based on the width of a finger. While largely obsolete today, this unit remains part of historical measurement practices in cloth and fabric industries."
} 