Feet (US survey) to Caliber Converter Feet (US survey) ft
Caliber
-
cl Reset Copy
Calculation: Feet (US survey) ➜ Caliber Calculation will be done after you enter a valid input.
Feet (US survey) unit in Length A U.S. survey foot is a unit of length used in American land surveying, equal to approximately 0.30480061 meters. This unit is slightly longer than the international foot and is used in precise land measurements for legal purposes. The U.S. survey foot is essential for maintaining consistency in property boundaries and land records across the United States.
Caliber unit in Length A caliber is a unit of length typically used to measure the internal diameter of a firearm barrel or the diameter of a projectile, such as a bullet. It is usually expressed in hundredths or thousandths of an inch, with common calibers including .22, .45, and .50. Caliber is critical in ballistics and firearm design.
Frequently Asked Questions (FAQs) about "Feet (US survey) ➜ Caliber" Conversion 1. What is the conversion formula from Feet (US survey) to Caliber? The formula to convert Feet (US survey) to Caliber in Length is:
Feet (US survey) / 0.0008333316666615334 2. How do I convert from Feet (US survey) to Caliber given a value in Feet (US survey) units? To convert Length from Feet (US survey) to Caliber, you can use the following formula:
Feet (US survey) / 0.0008333316666615334 For example, if you have a value in Feet (US survey), you substitute that value in place of Feet (US survey) in the above formula, and solve the mathematical expression to get the equivalent value in Caliber.
{
"conversion": "foot_us_survey-to-calibers",
"x_slug": "foot_us_survey",
"y_slug": "calibers",
"x": "ft",
"y": "cl",
"x_desc": "Feet (US survey)",
"y_desc": "Caliber",
"category": "Length",
"symbol": "m",
"formula": "x / 0.0008333316666615334",
"precision": 16,
"units": [
[
"meters",
"Meters",
"m"
],
[
"kilometers",
"Kilometers",
"km"
],
[
"decimeters",
"Decimeters",
"dm"
],
[
"centimeters",
"Centimeters",
"cm"
],
[
"millimeters",
"Millimeters",
"mm"
],
[
"micrometers",
"Micrometers",
"µm"
],
[
"nanometers",
"Nanometers",
"nm"
],
[
"miles",
"Miles",
"mi"
],
[
"yards",
"Yards",
"yd"
],
[
"feet",
"Feet",
"ft"
],
[
"inches",
"Inches",
"in"
],
[
"lightyears",
"Lightyears",
"ly"
],
[
"exameters",
"Exameters",
"Em"
],
[
"petameters",
"Petameters",
"Pm"
],
[
"terameters",
"Terameters",
"Tm"
],
[
"gigameters",
"Gigameters",
"Gm"
],
[
"megameters",
"Megameters",
"Mm"
],
[
"hectometers",
"Hectameters",
"hm"
],
[
"dekameters",
"Dekameters",
"dam"
],
[
"microns",
"Microns",
"µ"
],
[
"picometers",
"Picometers",
"pm"
],
[
"femtometers",
"Femtometers",
"fm"
],
[
"attometers",
"Attometers",
"am"
],
[
"megaparsecs",
"Megaparsecs",
"Mpc"
],
[
"kiloparsecs",
"Kiloparsecs",
"kpc"
],
[
"parsecs",
"Parsecs",
"pc"
],
[
"astronomical_unit",
"Astronomical Units",
"AU"
],
[
"leagues",
"Leagues",
"lea"
],
[
"nautical_leagues_uk",
"Nautical Leagues (UK)",
"nautical league"
],
[
"nautical_leagues",
"Nautical Leagues (International)",
"nautical league"
],
[
"leagues_statute",
"Leagues (statute)",
"st.league"
],
[
"nautical_miles_uk",
"Nautical Miles (UK)",
"NM (UK)"
],
[
"nautical_miles",
"Nautical miles (International)",
"nmi"
],
[
"miles_statute",
"Miles (statute)",
"mi (US)"
],
[
"miles_us_survey",
"Miles (US survey)",
"mi"
],
[
"miles_roman",
"Miles (Roman)",
"mi (roman)"
],
[
"kiloyards",
"Kiloyards",
"kyd"
],
[
"furlongs",
"Furlongs",
"fur"
],
[
"furlongs_us_survey",
"Furlongs (US survey)",
"fur"
],
[
"chains",
"Chains",
"ch"
],
[
"chain_us_survey",
"Chains (US survey)",
"ch"
],
[
"ropes",
"Ropes",
"rope"
],
[
"rods",
"Rod",
"rd"
],
[
"rods_us_survey",
"Rods (US survey)",
"rd"
],
[
"perch",
"Perch",
"perch"
],
[
"poles",
"Poles",
"pole"
],
[
"fathoms",
"Fathoms",
"fath"
],
[
"fathoms_us_survey",
"Fathoms (US survey)",
"fath"
],
[
"ell",
"ell",
"ell"
],
[
"foot_us_survey",
"Feet (US survey)",
"ft"
],
[
"links",
"Links",
"li"
],
[
"links_us_survey",
"link (US survey)",
"li"
],
[
"cubits_uk",
"Cubits (UK)",
"cubit"
],
[
"hands",
"Hands",
"hand"
],
[
"span_cloth",
"Span (cloth)",
"span"
],
[
"fingers_cloth",
"Fingers (cloth)",
"finger"
],
[
"nails",
"Nails (cloth)",
"nail"
],
[
"inches_us_survey",
"Inches (US survey)",
"in"
],
[
"barleycorns",
"Barleycorns",
"barleycorn"
],
[
"mil",
"mil",
"mil"
],
[
"microinches",
"Microinches",
"µin"
],
[
"angstroms",
"Angstroms",
"A"
],
[
"fermi",
"Fermi",
"f"
],
[
"arpents",
"Arpent",
"arpent"
],
[
"picas",
"Pica",
"pica"
],
[
"points",
"Point",
"point"
],
[
"twips",
"Twip",
"twip"
],
[
"aln",
"aln",
"aln"
],
[
"famns",
"Famns",
"famn"
],
[
"calibers",
"Caliber",
"cl"
],
[
"centiinches",
"Centiinch",
"cin"
],
[
"kens",
"Kens",
"ken"
],
[
"russian_archin",
"Russian archin",
"russian archin"
],
[
"roman_actus",
"Roman actus",
"Roman actus"
],
[
"vara_de_tarea",
"Vara De Tarea",
"vara de tarea"
],
[
"vara_conuquera",
"Vara Conuquera",
"vara conuquera"
],
[
"vara_castellana",
"vara Castellana",
"vara castellana"
],
[
"cubits_greek",
"Cubit (Greek)",
"cubit (Greek)"
],
[
"long_reeds",
"Long Reed",
"long reed"
],
[
"reeds",
"Reed",
"reed"
],
[
"long_cubits",
"Long cubits",
"long cubit"
],
[
"handbreadths",
"Handbreadth",
"handbreadth"
],
[
"fingerbreadth",
"Fingerbreadth",
"fingerbreadth"
],
[
"planck_length",
"Planck length",
"Planck length"
],
[
"electron_radius_classical",
"Electron radius (classical) ",
"electron radius"
],
[
"bohr_radius",
"Bohr radius",
"b"
],
[
"earths_equatorial_radius",
"Earth's equatorial radius",
"earth's equatorial radius"
],
[
"earths_polar_radius",
"Earth's polar radius",
"Earth's polar radius"
],
[
"earths_distance_from_sun",
"Earth's distance from sun",
"earth's distance from sun"
],
[
"suns_radius",
"Sun's radius",
"sun's radius"
]
],
"x_long_desc": "A U.S. survey foot is a unit of length used in American land surveying, equal to approximately 0.30480061 meters. This unit is slightly longer than the international foot and is used in precise land measurements for legal purposes. The U.S. survey foot is essential for maintaining consistency in property boundaries and land records across the United States.",
"y_long_desc": "A caliber is a unit of length typically used to measure the internal diameter of a firearm barrel or the diameter of a projectile, such as a bullet. It is usually expressed in hundredths or thousandths of an inch, with common calibers including .22, .45, and .50. Caliber is critical in ballistics and firearm design."
} 